- 24小时咨询热线
- 0574-88068911
90° 弯美制 JIC 外螺纹 74° 外锥 / 英管外螺纹 O 形圈
90° ELBOW JIC MALE 74° CONE / BSP MALE O-RING
| 代 号 PART NO. | 螺 纹 THREAD | O 形圈 O-RING | 尺 寸 DIMENSIONS | ||||||
| E | F | F 端 | A | B | S1 | S2 | |||
| 1JG9-04-02OG | 7/16"X20 | G1/8"X28 | O011 | 24.5 | 26.2 | 11 | 14 | G1/8"X28 | O011 |
| 1JG9-04-06OG | 7/16"X20 | G3/8"X19 | O113 | 27.5 | 36.8 | 16 | 22 | G1/4"X19 | O111 |
| 1JG9-04OG | 7/16"X20 | G1/4"X19 | O111 | 26.6 | 31.3 | 14 | 19 | G3/8"X19 | O113 |
| 1JG9-05-04OG | 1/2"X20 | G1/4"X19 | O111 | 26.5 | 31.8 | 14 | 19 | G1/2"X14 | O115 |
| 1JG9-05-06OG | 1/2"X20 | G3/8"X19 | O113 | 27.5 | 35.8 | 16 | 22 | G3/4"X14 | O119 |
| 1JG9-05-08OG | 1/2"X20 | G1/2"X14 | O115 | 31.5 | 43.2 | 22 | 27 | G1"X11 | O217 |
| 1JG9-06-04OG | 9/16"X18 | G1/4"X19 | O111 | 26.9 | 31.3 | 14 | 19 | ||
| 1JG9-06-08OG | 9/16"X18 | G1/2"X14 | O115 | 32.5 | 43.2 | 22 | 27 | ||
| 1JG9-06OG | 9/16"X18 | G3/8"X19 | O113 | 28.5 | 35.8 | 16 | 22 | ||
| 1JG9-08-04OG | 3/4"X16 | G1/4"X19 | O111 | 32 | 33.5 | 19 | 19 | ||
| 1JG9-08OG | 3/4"X16 | G1/2"X14 | O115 | 34.8 | 43.2 | 22 | 27 | ||
| 1JG9-08-06OG | 3/4"X16 | G3/8"X19 | O113 | 32 | 36.8 | 19 | 22 | ||
| 1JG9-08-12OG | 3/4"X16 | G3/4"X14 | O119 | 37.9 | 49.3 | 27 | 32 | ||
| 1JG9-10-06OG | 7/8"X14 | G3/8"X19 | O113 | 37.8 | 39.2 | 22 | 22 | ||
| 1JG9-10-08OG | 7/8"X14 | G1/2"X14 | O115 | 37.8 | 43.2 | 22 | 27 | ||
| 1JG9-10-12OG | 7/8"X14 | G3/4"X14 | O119 | 41 | 49.3 | 27 | 32 | ||
| 1JG9-12OG | 1.1/16"X12 | G3/4"X14 | O119 | 44.2 | 49.3 | 27 | 32 | ||
| 1JG9-12-08OG | 1.1/16"X12 | G1/2"X14 | O115 | 44.2 | 46.5 | 27 | 27 | ||
| 1JG9-12-16OG | 1.1/16"X12 | G1"X11 | O217 | 48 | 53 | 33 | 41 | ||
| 1JG9-16OG | 1.5/16"X12 | G1"X11 | O217 | 49 | 53 | 33 | 41 | ||
| 1JG9-16-12OG | 1.5/16"X12 | G3/4"X14 | O119 | 49 | 53 | 33 | 32 | ||
| 1JG9-16-20OG | 1.5/16"X12 | G1.1/4"X11 | O222 | 53.8 | 58 | 41 | 50 | ||
| 1JG9-20OG | 1.5/8"X12 | G1.1/4"X11 | O222 | 55.5 | 58 | 41 | 50 | ||
| 1JG9-20-16OG | 1.5/8"X12 | G1"X11 | O217 | 55.5 | 58 | 41 | 41 | ||
| 1JG9-24-16OG | 1.7/8"X12 | G1"X11 | O217 | 62.5 | 63 | 48 | 41 | ||
| 1JG9-24-20OG | 1.7/8"X12 | G1.1/4"X11 | O222 | 62.5 | 63 | 48 | 50 | ||
| 1JG9-24OG | 1.7/8"X12 | G1.1/2"X11 | O224 | 62.5 | 63 | 48 | 55 | ||
| 注： 1 螺母及衬套需另行订货。 管子直径 D 为公制时， 配用螺母及衬套分别选用 NB200、 NB500。 管子直径为英制时，配用螺母及衬套分别选用NB200、 NB300。 2 F 端与 DIN 3852 油口相配。 Note： 1 Nut and sleeve should beordered separately.The Nut and sleeve should be ordered separately.Thenut NB200 and sleeve NB500 is suitablefor metric tube,the nut NB200 and sleeve NB300 is suitable for inch tube. 2 F end isconnected with DIN 3852 port. | |||||||||
