- 24小时咨询热线
- 0574-88068911
45° 弯美制 JIC 外螺纹 74° 外锥 / 公制外螺纹可调向柱端轻系列 ISO 6149-3
45° ELBOW JIC MALE 74° CONE / METIRC MALE ADJUSTABLE STUD END L-SERIES ISO 6149-3
| 代 号 PART NO. | 螺 纹 THREAD | O 形圈 O-RING | 尺 寸 DIMENSIONS | ||||
| E | F | F 端 | A | B | S1 | S2 | |
| 1JH4-04-10OG | 7/16"X20 | M10X1 | O08.1X1.6 | 21.5 | 23.5 | 11 | 14 |
| 1JH4-04-12OG | 7/16"X20 | M12X1.5 | O09.3X2.4 | 21.5 | 27.5 | 11 | 17 |
| 1JH4-04-14OG | 7/16"X20 | M14X1.5 | O11.3X2.4 | 22.3 | 28.3 | 14 | 19 |
| 1JH4-05-12OG | 1/2"X20 | M12X1.5 | O09.3X2.4 | 22.3 | 28.3 | 14 | 17 |
| 1JH4-05-14OG | 1/2"X20 | M14X1.5 | O11.3X2.4 | 22.3 | 28.3 | 14 | 19 |
| 1JH4-06-14OG | 9/16"X18 | M14X1.5 | O11.3X2.4 | 22.8 | 28.3 | 14 | 19 |
| 1JH4-06-16OG | 9/16"X18 | M16X1.5 | O13.3X2.4 | 22 | 29 | 16 | 22 |
| 1JH4-08-16OG | 3/4"X16 | M16X1.5 | O13.3X2.4 | 26.8 | 30 | 19 | 22 |
| 1JH4-08-18OG | 3/4"X16 | M18X1.5 | O15.3X2.4 | 26.8 | 31 | 19 | 24 |
| 1JH4-10-16OG | 7/8"X14 | M16X1.5 | O13.3X2.4 | 31 | 31 | 22 | 22 |
| 1JH4-10-18OG | 7/8"X14 | M18X1.5 | O15.3X2.4 | 31 | 32 | 22 | 24 |
| 1JH4-10-22OG | 7/8"X14 | M22X1.5 | O19.3X2.4 | 31 | 33 | 22 | 27 |
| 1JH4-12-22OG | 1.1/16"X12 | M22X1.5 | O19.3X2.4 | 35.5 | 34.5 | 27 | 27 |
| 1JH4-12-27OG | 1.1/16"X12 | M27X2 | O23.5X3.0 | 35.5 | 39.5 | 27 | 32 |
| 1JH4-16-27OG | 1.5/16"X12 | M27X2 | O23.5X3.0 | 38.5 | 41 | 33 | 32 |
| 1JH4-16-33OG | 1.5/16"X12 | M33X2 | O29.5X3.0 | 38.5 | 41.5 | 33 | 41 |
| 1JH4-20-42OG | 1.5/8"X12 | M42X2 | O38.5X3.0 | 43 | 45 | 41 | 50 |
| 1JH4-24-48OG | 1.7/8"X12 | M48X2 | O44.5X3.0 | 49 | 49.5 | 48 | 55 |
注： 1 螺母及衬套需另行订货。 管子直径 D 为公制时， 配用螺母及衬套分别选用 NB200、 NB500。 管子直径为英制时， 配用螺母及衬套分别选用 NB200、 NB300。 2 F 端可与 ISO 9974-1 油口相配， 去掉挡圈与 ISO 6149-1油口相配。 Note： 1 Nut and sleeve should be ordered separately.The nut NB200 and sleeve NB500 is suitable for metric tube,the nut NB200 and sleeve NB300 is suitable for inch tube. 2 F end is fit for ISO 9974-1 port orISO 6149-1 port when useless of retaining ring. | |||||||
